You will need
- Satin bright colors, sewing supplies, the tape, thread for embroidery.
To prepare the pattern for the caps, measuring tape measure the head circumference and determine the depth of the headgear. The pattern should be slightly more ready caps because there needs to be overlaps on the seams (about 1 inch for the sides and 3 cm for podchinenija edges). Drawn blank must be the shape of a rectangle. The pattern can be done in several ways: caps with multiple seams on the sides within 270 to 180 mm, or with a single seam at the top with dimensions of approximately 520 180 mm.
Carefully pin the pattern to the fabric with safety pins and draw with chalk or sewing pencil. Cutting material, given the seam. Manually sweeps the details of the caps and try on the workpiece, if necessary, adjust its size by reducing or increasing them. Then carefully sew all the seams on the sewing machine. The edge of the fabric finish with a serger or zigzag seam.
Often on the garrison cap embroidered emblem of any camp. Her drawing prepare in advance. Often the contest by voting choose the best and then it and embroider in all caps. This can be done with absolutely any stitches: buttonhole, chain stitch, or stalked. The figure shows the emblems put on the fabric using transfer paper and embroider it.
Even the simplest cap can be decorated with cotton border, hand-made or ready. Sewing technique can vary depending on the skill of the master and his imagination. The edging or braid baste manually to the end of the piece or slightly above it, and then sew on a typewriter. The finished product carefully iron.