Before operating the safe read the instructions for its use. Check the batteries in the battery compartment. Typically, electronic devices are used, four power item voltage of 1.5 V. If necessary, install working batteries.
Turn the key in the direction of clockwise. Click on the "*" symbol and wait until the screen display shows "Code" or "Open". Initially, the box is usually set factory code "7-7-7-7" or "1-2-3-4", as specified in the documentation to the safe. Enter the appropriate code on the keypad.
Click on the " # " character, then the display appears the inscription "Good". Turn the knob of the safe up and open the door.
For further safe operation of the safe program your personal code different from factory. On the inside of the door press "M" button. Enter your new personal code and press the " # " symbol, for example: 7498#. Keep in mind that the code may contain at least two and no more than eight characters.
When programming a code you make a mistake, repeat the whole procedure starting from pressing "M". If the code is entered correctly, the LCD will display ”Good”, otherwise appears the inscription “Error”, but a travel will sound an error tone.
Verification code is need only when the door is open. After three incorrect code, the display turns off, and the locking device will be locked for a few minutes. Thus, any click on the lock button while blocking only increases the duration of the wait.
To lock the safe open, slam his door. Then insert the key and turn it in the opposite direction to move clockwise.
To prevent unauthorized access to the safe, store the key and the code number separate from your device, and do not provide the opening combination to unauthorized persons.