You will need
- - soft cloth/sponge
- - a dry absorbent cloth/sponge
- - dishwashing detergent or soap flakes
- - Taz
Type in a basin of warm water. Prepare construction or a regular blender, turn it on and carefully lower into the water. Small doses pour dishwashing detergent. Beat the mixture till the formation of good, dense foam.
If the contamination is not particularly strong, can be used for the preparation of foam a soap solution. To cleanse colored Wallpaper out of dish soap for white whitening. Can also use liquid Laundry detergent.
Take a sponge or a soft cloth (e.g. microfibre). Soak it in water, squeeze well. Scoop out a little foam.
Before you clean the entire surface of the Wallpaper, you should check their "strength". To do this, select a small piece that is not very visible. For example, one of the bottom corners. If you have after repairs are remnants of Wallpaper, check the lather on them.
Apply the prepared foam on the test area. Do not use force! Just gently, motions, blot with a sponge Wallpaper.
With a dry sponge/cloth, remove the remains of foam and droplets. Wait until the test section has dried. Check it for quality safety. If it is not deformed, began to bubble and the paint stayed in place, you can begin the main contaminants.
To clean heavily soiled surface, act as on the test section. Main conditions: do not use force and do not RUB the Wallpaper, otherwise the thin top layer of PVC film break. Just apply and blot stained area. Remove remaining moisture with a dry cloth or sponge.
Let the cleaned spot dry. If the contamination remains, do not proceed immediately to re – wash wall-they should dry out not just on the surface but also inside. Remember that frequent washing of washable Wallpaper leads to their rapid wear.
To prepare the solution do not use washing powders or any other.
Note the legend on the label of wall-paper. Thanks to them you can choose the best wash method that's right for you.