Advice 1: How to embroider a cross on the canvas

It would seem that a needle and thread - the most basic things that will be in the house of any person. But, if we add to this imagination, the patience, you can get incredibly beautiful things. Can embroidery to decorate clothes, home interior, make the picture and many more wonderful things, which every guest in your home, you will admire the Golden hands of the hostess. There are various techniques of embroidery. The most common is cross-stitch.
You will need
  • the scheme for embroidery
  • - the outline
  • - needle
  • - threads
  • - embroidery frames
  • - scissors
Instruction
1
Select the picture you would like embroidered. The variety of magazines for needlework is the scheme for embroidery on a variety of topics.
If you bought a ready-made set for embroidery, then it is the suitable size of the canvas for work and you selected the appropriate color threads.
But, if you buy everything you need yourself, pay attention to the tips that are in the schemes.
To outline don't accidentally run out while stitching, it is necessary in the beginning to determine what size canvas you need.
The diagrams almost always specify the size of the finished work. Add to each side by 5 cm and the size of the tissue. The additional inches add to the finished work can be placed in a frame or sew into a product.
If the size of the finished work not specified in the schema, we count the number of cells in the diagram horizontally and vertically. It's easy to do, because every 10 cells are highlighted in a different color or a bold line.
Then, attaching to the outline of a ruler, see how many cells is placed in a 1 cm Calculate how many centimeters will be required for the number of cells in the diagram. Do not forget to add an additional 5 cm.
2
Embroidery is usually used embroidery floss. In determining the amount of threads be careful. The thread should not be too long, otherwise it will be constantly confused, which will cause inconvenience. But short thread is also not necessary to measure, as you have often to change it. This is especially inconvenient when the embroidery of a large area with one color.
The diagrams also often recommended how many threads is preferable to embroider. When you gain experience, you will do as you wish.
3
Thus, it is determined the size of the canvas, picked up the thread. Now you need to clip on the cloth, the embroidery Hoop to embroidery with canvas not creased, and the crosses were smooth.
Measure out the desired length of the thread. In this example, the embroidery will be done in 2 strands. Separate from the skein (bundle of threads) 1 thread, cut approximately 50 cm Fold the thread in half and insert into the needle eye. No knots to do.
Drag the thread through the fabric, so that the end of the thread on which the loop remained on the wrong side. Make a stitch on the diagonal cells.
How to embroider <b>cross</b> <strong>canvas</strong>
4
Pass the needle through the loop from the wrong side, and then gently tighten the thread. Thus, the thread is fixed, but there is no knot.
How to embroider <b>cross</b> <strong>canvas</strong>
5
Insert the needle into the lower right corner of the cell and make a stitch on the diagonal. I got a cross. But if you need not one but a number of crosses of the same color, it is more convenient first to make some polyreactive. After the needle is inserted in the lower right corner of the cell, enter it diagonally to the upper right corner of the next cell, and then again at the bottom, etc. On the wrong side at this time make vertical seams.
How to embroider <b>cross</b> <strong>canvas</strong>
6
Once you have made the required number of policraticus, enter the needle and thread in the upper left corner of the previous cell, then at the bottom, etc. it Turns out a number of crosses.
How to embroider <b>cross</b> <strong>canvas</strong>
7
Embroider the first one color and then change the thread. So you will know what all the ranks that need to be done with the color ready. Don't have to calculate the cells to start another thread.
To change the thread, pull the needle through the stitches on the wrong side, cut thread.
How to embroider <b>cross</b> <strong>canvas</strong>

Advice 2: How to embroider a cross on the diagram

Regardless of whether you are working with a finished bought kit that includes yarn, canvas and instructions, or you can pick up the floss and fabric to any scheme, the main principle of the embroidery – no rush, otherwise you'll have to dissolve the embroidered area.
Instruction
1
The first step in embroidering cross – to make a layout on canvas. If you took up embroidery of a ready-made set, look at the diagram, which marked the middle of the embroidery. Usually its designation manufacturers use the arrows on the cells vertically and horizontally. Applied to set the fabric fold in half, and run a line of basting stitch. Now do the same in the other direction. The intersection of the threads will point you to the middle of the picture, where it will be possible to start work. If mid-to instructions are specified, will retreat from the edge a sufficient number of threads and make a line horizontally and vertically. The beginning of the work you choose is the upper left corner or another, as long as you feel comfortable. To as the embroidery was easy to test yourself, lay auxiliary basting thread through an equal number of crosses, for example, every ten or thirty. This allows you to spot the error and help to find the cell on the canvas.
2
If you are working with a set, then the thread you have, they are attached on the holder, or they need to sort out flowers and attach to the holder alone. The second option sets are much rarer, mostly American manufacturers. If you only have a schema, you need to choose the appropriate shades. It can be done "by eye", i.e. to choose the thread that you seem to clash. Or, read the schema, view, thread what the manufacturer instructions say, and the numbers choose the right floss. If they were not on sale, you can use special tables to translate the part number thread in similar shades from another manufacturer, such as Anchor DMC or Gamma. For convenience, make a holder out of cardboard on their own – just punch the hole punch holes for the thread and sign them or draw symbols.
3
Now start embroidering. Each color of floss has a special symbol on the diagram. The first color is better to choose one that is located close to the place where you start the embroidery center or the edge. In the instruction set it says how many threads to use for independent work, use this number of threads to outline a well "painted", but the drawing was too thick. For the standard weave of the canvas 14 Aida using two strands of floss, at least three. Embroider squares of the selected color, considering their location vertically and horizontally. Remember that the first stitch of all stitches should be in one direction, and closing in another. When the thread is ended, or there wasn't a cross of this color, pin the end and start embroidering in a different color. For the convenience of control on the scheme embroidered crosses in pencil.
Note
Before you begin the embroidery, wash your hands with soap and water.

Keep on the wrong side didn't mess up the thread and there was no knots.
Useful advice
If you have a lot of different shades of threads, make them the envelopes or pockets and sign the room, as well as in the diagrams indicate the numbers of the relevant threads, you will see the location of the desired color.

Over time, the scheme may lose its original look and these colors can be difficult to distinguish. It is recommended to store the schema in a file or pasted with adhesive tape.

If during operation of the twisted thread, hang it down with a needle, so she unwound. So crosses will be neat and smooth.

In order not to lose sight of a number, which is embroidered, convenient to use with a ruler.

First, it is recommended to do the embroidery threads bright, then dark, so as not to stain the embroidery of dark hair.
Search
Is the advice useful?