Advice 1: How to knit the bodice

Original swimsuit, elegant summer top, even the upper part of formal dresses require the ability to knit the bodice. A feature of the implementation of this part is that the bodice tightly hugs the body. When sewing is governed by the depth of the undercut. Knitted by hand products for undercut is usually no, but there are other ways to give the part the desired shape.
You will need
  • - cotton thread crochet;
  • - the hook on the thickness of the threads;
  • - cm tape.
Instruction
1
Remove the measurements. You need to know 2 bust. One scoop is removed at the most prominent part, the cm passes through the centers of the mammary glands, under the arms and in the middles of the blades. The second measurement is removed under the Breasts. With this line you will begin work. Measure also the height from the bottom line to the convex part and the overall height. Measure the distance to a smaller bust from the middle of the distance between the Breasts to the middle of the sides.
2
Tie crochet rectangle approximately 6x5 cm columns without nakida, repeat with him all those manipulations that are normally conducted with a knitted products: wash and iron. When you crochet the size of the product after washing and Stripping usually change slightly, but in this case, the product is tight fitting shape, so it is best to take into account the weight of nuances.
3
Calculate the number of loops and knit chain of air loops in accordance with a smaller bust. Make 1 loop on the instep and knit a few rows of columns without nakida.
4
Find the middle of the row and mark it. Measure from this point the width of the cups in one and the other side and also mark. The cups are knitted separately. From the beginning of the series davaite to the middle, then flip the work and doverite to the mark width. Much depends on the size of the breast. If it is small, the loop in the first row can not be added. For cups large size on the first after the main strips of row in every 3, 4 or 5 column 2 provarite. Remember, how many loops you added.
5
Begin to diminish the loop from the second row of cups. This can be done in several ways - for example, to dobesilate rows on the last 2 column or purl 2 columns along each side. From the openings, this must be done through a number, and by the middle of the front - depending on what form of neckline you want. You can also subtract columns across a row, but acceptable and 3. Subtract loops and center - for example, promazyvaya together in 3 columns across the row. As a result, you will get something like the gathered bottom of the triangle.
6
Tie a Cup to the desired height. You must have a number of columns 5-8. If the hinges got more, adjust their quantity, provata a few of the bars 2 in one. Then knit the strap. It runs straight strip of a length to be able to tie or zip up. It may be a continuous strap without buckle. She joins the second end to the top of the other Cup. The second Cup fit similarly.
7
Fill the bottom. To open this leotard bodiceand will be enough, but the topic can be longer. Go back to the number with which you started. Direct link the canvas to the desired length. You can close off knitting in the round, but then the columns perform better for the back wall.
8
The bodice can be no closure. Then it is necessary to sew the back seam. To connect items and hook, in this case it is even more preferable. Will look very good and lightning.

Advice 2: How to tie crochet bodice

From the bodiceassociated hook can make the top of the bathing suit, or dawasa, the lower part of the arbitrary pattern to make a summer top. The bodice fit a thin thread, using hook No. 2 or No. 3.
You will need
  • Approximately 200-300 g cotton thread of a thickness of 120 m/50 g or silk thread thickness of 150 m/50 g or thread from a cotton blend with a polyacrylate, with a thickness of 120 m/50 g; hook №3.
Instruction
1
To tie the bodice is crochet, you need to start knitting with one of the cups. Usually knit first the left Cup of the bodice. For size 34/36 need to dial a chain of air loops 28 and 3 air loop lifting. Continue to knit columns with nakida. Instead of a column with nakida knit the next row is necessary, starting with 3 loops rise.
2
6 (six) rows or 8 cm from typesetting edge you need to keep on the right side of the hinges 14, 14 on those loops that I need to associate another 6 (six) or 8 cm and finish the job. The right Cup of the bodice necessary to communicate symmetrically with the left. Sew the seam of each Cup, then both cups are seamed or knit into a few inches in the middle.
3
You can link the bodice crochet pattern from "pinecones". For sizes 36/38 and 42/44, dial 32 (36) loops and 3 air loop lifting, continue knitting pattern "bumps". To do this, lush are finished one column and one air loop, alternating the pattern. Lush column fit: one do yo, enter the hook into the loop and pull the thread, repeat this technique 4 times, make a yo and they are finished all the loops that are on the hook, again, are finished single air loop.
4
Provatas 8-9 cm from the edge of typesetting leave for the center seam to the right of 8-9 cm Work to finish in 16-18 cm from typesetting edge. To connect the seams of the parts. Provyazat along 2-3 cm of the outer corners of the cups to connect them together.
Search
Is the advice useful?