Advice 1: How to disable ink monitoring

Some printers and multifunction devices is the control function of ink level. When the cartridges run out, the device is locked. To prevent this from happening, this function can be disabled.
Instruction
1
Be careful: refusing the automatic control of the ink level, you will need to monitor your device. In certain cases, disabling this option increases the risk that you will burn out the printhead, if you did not correct the situation.
2
As a rule, the principle of the action when disconnecting is as follows: read emerging reports that the device is low on ink. On the body of the printer press and hold for 10 seconds to activate the application with a triangle and a flashing indicator. The control system of the ink level will be disabled for a specific ink (one of which you got an alert).
3
For some cartridges will have a different method: Open the "control Panel" via "start menu" in category "Printers and other hardware" select the icon "Printers and faxes". Click with the right mouse button on the name of your printer and select the context menu item "Properties". On the Ports tab remove the marker from the field "Enable bidirectional support". Click on the "Apply" button and close the window.
4
Also for certain models of printers there is utility to reset the ink counter (for example, IPTool). Install and run the utility, turn on the printer, select your model. Click on the Reset button (reset) for black and color ink group Ink Level (ink level) set the value to "100".
5
To the ink in the printer spent less, adjust the eco mode. To do this, open the properties window for your printer as described in the third step, and go to the General tab. Click on the "print setup" and additionally opened window open the tab "Paper/Quality". In the "print Quality" and select it with the dropdown list the desired value or select the marker field EconomMode to turn on the eco mode. Apply the new settings.

Advice 2: How to disable ink level control

Many users are wondering how to disconnect control of level of ink in the printers and multifunction devices, because the messages about the absence of toner sometimes does not correspond to the reality and simply hinder the work.
You will need
  • printer or multifunction device.
Instruction
1
Disable tracking of ink levels. This can be done by using a reset chip built into the cartridge. Just they designed to to determine the ink level, and prevent re-filling the cartridge. But to reset the chip hard enough.
2
Wait for the moment when one cartridge runs out of ink and the printer/multifunction device you will see a warning message that prompts to continue or to stop printing. In this window click "OK", or click the button Stop/reset (the button looks like a red/orange triangle in the circle). Will happen resume printing. After one of the cartridge completely run out of ink in the printer screen re-appears with an offer to replace the cartridge. If you have a multifunction device/printer with integrated cartridge, press the button "Stop/reset" and hold it for ten seconds. So you disconnect tracking level of ink in the cartridge.
3
Disconnect the control ink level printer with separate ink tanks for this, answer the questions that will appear on the computer screen. After the occurrence of the query on the screen, press the "Stop/reset" in case that you have a multi-function device, or "Resume/cancel", if you have a printer, and hold it for ten seconds. Disabling control of the amount of produce for each ink cartridge separately. It will not block printing and will not affect the print quality.
4
Disable the "Control the level of ink" on the computer to which it is connected. To do this go to "control Panel", select "Printers". Next, open the context menu on the printer icon, select "Properties". Then go to the tab "Service", select "status Information" printer, click "Options". Uncheck "Display a warning automatically."
Search
Is the advice useful?