Advice 1: How to distinguish a real diploma

Fake diploma - a reality that may face the employer. But there are methods of testing that will help you to understand whether a person is presenting you the relevant document has a higher education.
Check for the authenticity of the form of a diploma. Since 1996, the diplomas of higher educational institutions have numerous typographical degree of protection. On the inner left side of the form of genuine diploma needs to be seen with the words "Russia" and "Diploma". Also, when Photocopying of the second instance appears the word "Copy". On the right side of the form, where is the main text, you should see the sign "Russia", and also a special very small font which is recorded the full name of the Ministry of education or the Federal Agency for education.
The diploma itself typically is a folder in A5 format with a separate leaflet with list of subjects and marks. However, a diploma without the "brown" should not necessarily be considered a fake. For example, in the early nineties due to lack of funds and materials in some universities the diploma was issued on a plain paper without letterhead of the cardboard cover.
Verify that you have correctly filled the form. It typographically or by hand should be written the name of the graduate and his specialty. Must also attend a University seal and signature of the rector.
If the external diploma requirements find out if it is registered in the database of the University. Have each form have a unique number which must be in the University database. However, the University is not obliged to provide information upon request of private organizations. The employer can resolve the issue by sending a request on behalf of the applicant position with his personal signature. In this case, the University will be able to provide help, as will not be impaired by the legislation on personal data.

Advice 2: How to distinguish a real diploma from a fake

Forgery of various documents, including diplomashas become very popular in our time. To one day become an "expert" need a certain amount of money. You don't even need to say what the problem can bring to a prospective employer people who bought a diploma and have head zero knowledge. How in job to distinguish the real diploma from a fake?
You will need
  • - magnifier
  • - infrared detector
  • - Xerox
  • - care
Look closely at the coat of arms of Russia is depicted in the upper part of the right side of the spread degree. It runs Orlovsky printing method. Image taken with Orel machine can not be repeated not only by the offset method used in printing, but even most of this machine without having the original forms. Moreover, machines for Orlov's printing has only GOZNAK.So, on the original of the diploma with a magnifying glass you can see items such as: crosses for the power, and crowns; beads on the power (13 pieces); the eyes of a horse on the shield and other small parts. On the forgery these elements are simply blurred due to lack of image clarity. Keep in mind: the coat of arms of the Russian Federation can not be faked!
The second highest degree of protection - regional labeling. Every diploma issued shall be entered in the Unified State Register (accordingly, it is possible to check), and on the form of the diploma shall be marked with the proper knowledge, you can decipher that issued the diploma, what type of document it is, and other information. The markings are located right under the signature "Diploma" on the right of the reversal of the diploma.
Direct link with regional labeling has the registration number and date of issue of the document. They are located at the bottom left side of the spread degree. Falsifying numbers in the field for the registration number I put random, but to find out what is coincidence and what is not, can only be addressed to the University specified in the diploma.
In the presence of UV lamps can be checked for authenticity watermarks. Depending on the year, the signs can look like the inscription "Russia diploma", "RF" or "RF" enclosed in a rectangle with a stylized corners. The sign of authenticity is the lack of image water mark in the light of the ultraviolet rays. Why? - because the original water-marks applied by stamping, i.e. are a consequence of the deformation of the paper. While fake watermarks covered with transparent paint, which, of course, begins to glow in the UV rays.
Continuous line - gillery protection element is a background pattern of continuous lines intersecting at different angles and change color randomly. A continuous line is also Orlovsky printing method and cannot be faked. When considering the counterfeit document through a magnifying glass you can see that the lines are continuous, but monochrome (i.e. one color), or change color, but are interrupted (they will appear as bitmap - individual points).
You can also try to make a copy of the reversal of the diploma. The sign of authenticity is the presence of out Xerox copies of the relevant inscription: "copy". When fake low quality this element of protection is missing. A method of manufacturing the protection element is simple - the inscription on the document to apply the invisible paint, which manifests itself under the influence of high temperature - so it is easy to forge.
Another low-level security feature - silk threads embedded in the document. Strands impregnated with a special solution, which is in the ultraviolet radiation begins to Shine brightly. As in the previous case, this method of protection is not technologically complex, so only the fakes are low quality. There are elements of protection as the microlettering and colour transition - currently, they are also quite easy to fake, so you can't rely on their presence as a sign of true authenticity.
Useful advice
Even when passing all tests there is a risk that the diploma is forged, but at a very high level. In this case, protection from unscrupulous workers can be a substitute for professional testing by interview and a trial period.
Is the advice useful?