When choosing a notebook stand you need to consider a lot of nuances. Start with the definition of a type of accessory which you will like to work.
If you often keep a notebook on your lap, purchase a soft stand, which is located inside a special filler. This accessory provides comfortable work with the laptop, but unlikely to significantly reduce the temperature of the computer.
To install the laptop on the table, purchase a hard stand. Some models can have special openings, allowing you to consistently get air from the environment.
More expensive models of holders are equipped with additional coolers. Purchase this accessory if you are using a mobile computer for gaming. The external fan is able to significantly lower the temperature of the laptop that will help to avoid equipment overheating.
Remember that the cooling performance depends on the material from which made stand. In this case, the aluminum products are way better than the plastic counterparts. An obvious disadvantage of such stands is quite a lot of weight.
Pay attention to the possibility of folding accessory and change the angle of the table top. Such a role will not only achieve the most comfortable working with a laptop, but also facilitate the transport of the cooling element.
When choosing a stand for your mobile computer be sure to check the dimensions. Remember that your computer needs to rely on bench legs, and lie down to her whole body.
Some stand endowed with USB ports. This allows you to compensate the same connector of the mobile computer connected to the fans. Pay attention to this especially if you are constantly connected to the laptop peripherals.
Advice 2: How to choose a cooling pad for laptop
Overheating laptop can cause a number of serious problems, starting with the unresponsiveness of the system to access components of the system. To avoid these problems and extend the service life of the device, it is recommended to use a special cooling stand.
Basics of choosing a cooling stand for notebook
First you need to choose the type of device. Stands are divided into two basic types: active and passive cooling. In the first case, the equipment reduces the temperature by using built-in coolers, while in models of the second type of their own fans there. If your laptop is overheating, give preference to the first option. If you only need to maintain the optimum temperature, it will be enough models with passive cooling.
When you choose any type of device, pay attention to its size. If the stand is too small, it will not be able to provide effective cooling of the laptop. Too large models are also inappropriate – for the most part they will work in vain. You should choose the stand which size is suitable for your laptop.
Pay attention to two important interrelated criteria – noise and power devices. The higher the capacity of the coolers in the laptop stand, the better they will cool the equipment. On the other hand, high speed can lead to increased noise that fans make. If your laptop doesn't overheat too much, it should prefer the Golden mean. In the case when it is necessary to significantly reduce the temperature of the device, it would be appropriate to buy a stand with a very powerful coolers, even though they will work quite noisy.
Cooling pad for laptop: additional details
Remember that a large number of fans is not an indication that the device is of high quality. The best option – stand with 1-2 powerful coolers. Products with 4 or more fans, each of which has a relatively low power will be less effective. Moreover, use of a laptop will not be too comfortable due to the high noise level.
Do not ignore this criterion as the design of the cooling stand for laptop. Of course, the technical performance is more important than appearance, however this does not mean that design is possible not to pay attention. Among the many modern coasters, you can easily find one that will fit perfectly with your model laptop. Moreover, it offers model with led lighting and other additional elements that can not only improve the design of the cooling stand, but also to make the equipment more functional and convenient to use.