You will need
- - metal profile;
- - moisture-resistant drywall;
- - plastic panels;
- - ceramic tiles;
- - fastening elements;
- - screwdriver;
- - the range.
Make sure that the pipes in the room are free of defects and damage. It is also desirable that the design of the pipeline does not contain a large number of connecting elements. Otherwise, flush mounting can deliver some inconvenience in the event of need for repair of communications.
Check the connections for leaks. To be the casing pipe used special insulating materials. Connection, follow from the same material from which pipes are made. This will prevent fogging of the pipe and allow the material to expand if the pipe is hot water.
Getting to the installation, draw a detailed floor plan, putting in the place of laying of pipes and connections. Be sure to consider space for the installation of technological hatches, which will have free access to the system for its maintenance and repair.
In case of technical impossibility to completely hide the pipes in the wall use a method in which by closing communications with decorative box. At the location of the sewer and water lines mount frame of a metal profile.
On a pre-made measurements and cut the pieces of profile grinder, and connect them together with screws. Design to securely attach to a wall surface by screws with dowels, making it impossible to shift elements of the frame.
The finished panel frame customized according to size plastic panels or sheets of moisture resistant drywall. The panel further finishing is not needed. The drywall will be coated with ceramic tiles.
At least in the areas of access to valves and taps to mount the technological hatches or doors, inserting them into the predrilled holes of the frame. Now the room of the toilet has the complete and practical form.