Advice 1: How to connect the wires to the motherboard

The first stage of the installation components in the system unit of a computer is to install the motherboard and connect the corresponding wires. From the correctness of the connection will depend on the further functionality of the computer.
Instruction
1
Collecting computer, you must connect the following wires to the mother Board:
• power;
the wires from the button Reset button power-off, system dynamics, and indicators of the operation of your computer and download the hard disk;
• the Flex cable or the cable from the hard drive and CD/DVD drives;
• other wires from other components if necessary (for example, wire additional USB ports).Connect the wires to the mother Board should be in the order described below. To get the correct connection diagram, please check the user manual of the motherboard by downloading it from the manufacturer's website.
2
The wire that supplies voltage to the motherboard from the power supply, combined into a single connector. In size it exceeds the others, and corresponds exactly to the contacts on the system Board. Connecting wire, tightly secure them using a special tab on one side of the connector. Following connect the power wire running from the cooler to the contacts on a card, denoted by the ID Fan.
3
Then connect the wire from the signal lamps and buttons of the housing of the system unit to the appropriate terminals on the motherboard. Usually they are located in one place. Each contact is marked with a corresponding identifier, such as Pwr, and if connected incorrectly, the corresponding button or lamp will not work.
4
After you have connected the power and other wires to the mother Board, insert the cables and the cables from the hard drives and optical drives in the appropriate connectors. After that, you may need to connect the wires to the mother Board from other devices, if provided for by their design. To define contacts for connection to pre-study the wiring diagram in the user documentation.

Advice 2: How to connect audio from motherboard

If you haven't bought a separate sound card or you do not have a personal computer and a laptop, you may need to connect the sound with the built-in motherboard sound card. On modern motherboards, these built-in sound Board reached such a level that almost in no way inferior to discrete sound solutions. Even support 8-channel surround sound from the integrated sound-making ceased to be something special.
You will need
  • - Computer (laptop) with Windows;
  • - motherboard with integrated sound card;
  • - drivers for integrated sound card;
  • - sound speakers.
Instruction
1
First, install the driver on the built-in sound Board. Find the disk that came with your motherboard, there should be everything you need, including these drivers. Installing sound drivers happens almost automatically – just insert the disk into the drive, click the line responsible for the installation, and follow the instructions on the screen. The installation wizard will ask you to accept the license agreement, agree with them, click Next and wait for installation to finish, then restart the computer or laptop.
2
After you boot into Windows, wait until the system detects a new device (i.e. your sound card) and install the driver. In the end, you should receive a message saying that the device is installed and ready to use.
3
Plug the wire from the speaker connector to sound Board. If it's speakers, it is sufficient to connect only one wire. If it is a 6 - or 8-channel audio system, the wires can be several. If you have a computer, the connectors on the sound Board is usually painted. Green salad or a color marked input for the stereo speakers and center speaker in the case of multi-channel audio system. Problems with detection of the desired connector should arise, just put the corresponding wire. Have multichannel audio all the wires that connect to the sound card, usually painted in the same colors as the connectors on the sound card.
4
If you have a laptop, plug the sound Board can be any color. To avoid mistakes, refer to the user manual, or you can turn on the laptop the music and alternately insert the plug in a few connectors on it until you hear sound. You can not be afraid that you insert the plug into the wrong connector, as it does not harm the laptop.
Search
Is the advice useful?