Advice 1: How to set bios

BIOS – base input-output system, the basic system input-output is a set of parameters defining a mode of operation of computer hardware. These settings can have a major impact on the computer performance, affecting the operation of the CPU, memory, hard drives, floppy drives and other systems.



Before trying to configure the bios, backup your important documents and other data located on the computer. Careless manipulation of the bios can end fatally.



  1. First of all, you need to open the bios setup menu. To do this, press several times the key menu access the bios at the moment after self test of the computer immediately after switching it on) and before loading the operating system (the appearance of the four-color Windows flag). Pressing the access key is usually Del or F2. Usually on the screen after the test system is displayed in a tip — by pressing some key to enter bios.

  2. In the boot tab you can specify the order in which the system polls the drives at boot. For example, to install the system, you usually have to boot from the CD drive, and during normal operation of the better off to protect against viruses and other malicious software that may be installed on the disc. First boot is produced with First Boot Device.

  3. In section Power management of the CPU cooler and case (para Hardware monitor). It is recommended to enable (Enabled) the control of all coolers (CPU Fan and Chasis Fan) and the Fan Profile set to Optimal. This will help avoid overheating and system failure of the processor or volatile of his work.

  4. In the section Boot Settings Configuration you can disable Full Screen Logo (Disabled) — then when you boot instead of the manufacturer's logo will be visible to more meaningful information about the results of testing the system.








Of course, it is possible to configure the bios in many other settings, however, we emphasize again the seriousness of any transactions with the BIOS. As a rule, most of the bios settings in an optimal way, providing if not the most productive, the most reliable operation of the system.

Advice 2: How to set the BIOS graphics card

The three-dimensional graphics accelerator or graphics card, may be built into the motherboard. Often used external video cards that do not need to do any settings in the system. But for the built in option to fine-tune. To configure the BIOS in the graphics card, you will need a minimum knowledge of the English language and the ability to navigate the text menus.
Instruction
1
Turn on your computer or restart it. This is necessary in order to enter the BIOS system.
2
Click to enter the configuration of your basic system input and output. To do this, after power-up press the DEL key — in many cases using this method of activation. Some manufacturers use a different method, F2 or F10.
3
Press several times to not miss the right moment in the boot process. If done correctly, you will see the BIOS screen, designed in bright colors of white and blue colors. While the top row lists the names of the categories that you can configure. Or a window with two columns of names of groups of settings on a dark blue background. It depends on the manufacturer of the BIOS firmware on your motherboard.
4
Locate and select the menu item with the word Chipset. There are various options, for example, or Chipset settings advanced chipset settings. In blue and white BIOS, you must first select the tab Advanced menu and activate the required row. To navigate through the settings use the arrows directions on the keyboard. Used to select the Enter key. That is when you select something in the script and pressed Enter, you find yourself in a submenu with a list of options or actions. And pressing Enter in the string setup, you get the possibility to change the value — this is the video configuration in the BIOS.
5
Select the menu option responsible for the size of video memory. It is usually called Graphics Aperture Size, AGP Aperture Size or shared memory. Specify the largest possible number from the available list to the selection, for example, 256 MB or 512 MB. This will allow the video card to work with the specified amount of memory and speed up the work of the graphics subsystem. Keep in mind that the used memory. If you have less than one Gigabyte, then at higher values of memory, the computer may slow down.
6
Save the settings on the card that you made. To do this, press Esc and select EXIT. Find the line that says "Save Changes" and press Enter. A message appears with the request to confirm or cancel saving: press Y, the computer will close the BIOS and restart.
Search
Is the advice useful?