Advice 1: How to improve processor performance

The higher performance of the processor, the better. This statement few would dispute, because the increase in productivity enables you to perform in less time a greater number of operations and increases the overall speed of your computer. Of course, to increase the "power" of the CPU by substituting a more modern and expensive, but you can use a method that does not require financial investments.
You will need
  • Computer, CPU, basic skills for configuring the BIOS
Instruction
1
If the cooling system is efficient enough, you can move on to overclocking. Go to BIOS (press while booting the computer press DEL, F2 or F1, depending on the Board model). Find the tab with the characteristics of the processor. It may be called differently, as you can read in the manual to the motherboard.
2
The easiest way is by overclocking the CPU by raising the system bus frequency. In the BIOS this feature is called, usually, CPU Clock or CPU Frequency. Overclocking is done by raising this characteristic.
3
The final frequency of the processor is the result of multiplying the frequency of the bus on the so-called multiplier of the processor. Accordingly, the acceleration processor you can exercise by just increasing the multiplier. However, in most modern CPUs it is locked. The exceptions are the Black series processors from AMD and processors Extreme series from Intel, in which the value of the multiplier can be changed.

Advice 2: How to increase PC performance

When buying your personal computer works at maximum capacity. But you can own, without the help of a professional programmer to improve the performance of your PC.
Instruction
1
To improve the performance of your computer, you need to "overclock" the processor. To perform this operation through the BIOS. Restart the system and press the “Delete” button. In the menu that appears you need to find the option that is responsible for the memory frequency. Most often this section is called Advanced Chipset Features or POWER BIOS Features, if your PC doesn't have this title, specify in the user name section responsible for the memory timings.
2
Set the minimum value. This is necessary to ensure that when overclocking to avoid failure. Now find Woe your personal computer the option of AGP/PCI Clock and set the value equal to 66/33 MHz.
3
Enter POWER BIOS Features. It is responsible for frequency FSB (processor speed). Start to increase the value by 10 MHz. Save the settings and reboot the system. Using the program CPU-Z to check the stability of the processor. If everything is working properly, then increase the frequency by 10 MHz. Follow this procedure until, until will not disrupt the normal operation of the processor. Then reduce the value for 10 MHz and save.
4
To improve the performance of your personal computer, you need to defragment the drive. Go to "start" - "All programs" - "Accessories" - "system tools" and select "Defragment files". Specify the partition of the virtual disk and click "Defragment".
5
To improve the quality of computer you can use "disk Cleanup". Go to "My computer", right-click on the desired virtual drive and open "Properties". Click "disk Cleanup".
Note
Surgery to increase processor performance is over stated by the manufacturer is called "overclocking". Engage them with caution, because overclocking causes increased heat and increased load on a computer system. Before you start overclocking make sure the cooling fans are working properly and provide the desired level of cooling. If the CPU temperature normally exceeds 50 degrees, to disperse it without upgrading the cooling system is contraindicated.

In most cases, you should not increase the CPU frequency more than 20 percent from nominal.
Search
Is the advice useful?