Advice 1: How to assemble computer chair

Computer chair is simply a must for anyone who spends a lot of time at the computer. How comfortable are you sit, depends on how long you will be able to work, and also the quality of the work itself. Awkward position during operation can negatively affect posture, spine, hands and the General state of health. Buying a computer chair is the norm for families with any income and there is sufficient space in the room.
As with almost any piece of furniture, computer chair is sold unassembled. That is, you bring home a box of parts and detailed instructions for assembling the chair. These pieces of furniture usually are going on their own, without calling the specialists, as usually the instructions is quite enough even for those who have no experience in this type of work.
Before Assembly, inspect all parts, namely, quantity, quality. Check that set forth in the specifications. Check the back seat, patrocle, all screws and elevators, as well as all other parts. To collect better knowing that everything is in place and of appropriate quality.
Start Assembly from the bottom. Take Petrucci, wheels and install them all in patrocle until it stops. You will hear something like a click.
Now we need to install gas lift in patrocle. On the Elevator from top to wear special cover so that the narrowest Cup your case was at the very top of the lift, and a wide Cup, respectively, at the base of the chair.
Gas lift can be a special plug that manufacturers of computer chairs sometimes wear in order to gas the elevators were not revealed spontaneously during shipping or during Assembly of the chair. Before installing in patrocle gas lift in the presence of this plug it must be removed.
Continue on to the armrests. Firmly fasten it to the seat with special bolts. If you screw the armrests firmly enough, later they will loosen and may even break.
Further work with pestroy seat. Install it in a permanent, pre-selecting the distance between the back and seat. Then fix permanent using a long screw.
Install seat with armrest and backrest on a gas lift. Check the operation of the gas lift immediately. If you pull the lever towards you, the chair will fall.
It remains to combine the permanent with the back, to adjust the lateral tilt of the chair, the most suitable for you and your computer chair ready.

Advice 2: Gas lift for chair: the device and working principle

Only office chair can provide comfort during prolonged work at the computer. Just details of the chairs can be set according to individual anatomical features. For this and invented a mechanism called "gas lift".

Design features of the mechanism of "gas lift"

Such a mechanism is between the seat and the wheels of the office chair. It is a rather long tube of metal, which is covered with plastic. The mechanism of "gas lift" has a distant resemblance with the mechanism of tipping the truck. But of course their sizes vary considerably.

Usually "gas lift for chair is equipped with pneumopathies, the amount of which does not exceed 16 cm of pneumopathy depend on the type of the chair. The larger the value, the higher "gas lift" to lift the chair.

The device and principle of work

The principle of operation of the mechanism is quite simple and comprehensible. So the steel casing is a small cylinder. This refers to the body under a plastic covering of the chair. The cylinder is a rod with the piston. Here he provides the raising and lowering of the entire structure. Also, the cylinder has two reservoirs, between which there is a special valve. In fact, this valve is responsible for the movement of "gas lift" chair. The direction of movement of the stock usually depends on what position will be the valve. It can be opened or closed.

When the chair is in its lowest position, the piston is at the top of the cylinder. If you are trying to raise the seat and push the lever, the pressure of the piston on the special button. Actually this button and opens the valve between the two chambers. Simultaneously, gas flows from the reservoir of the first camera and the second device is gradually lowered. But the seat opposite, and starts moving up.

Then the button is closed and the gas supply to the tanks is stopped. Consequently, the stock already does not change its position. If you want to omit the "gas lift for chair, usually press the lever to the mechanism. As a result, the gas from the second chamber moves to the first. The piston begins to move upward. The seat is lowered to the desired height.

By the way in case of breakage of the mechanism of "gas lift" it can not be repaired. In the event of damage to the tank replacement becomes inevitable. Also not advised to open this device, as the gas inside is under high pressure. To replace the mechanism without the help of a specialist is impossible. It would be better to contact the appropriate organization.
Is the advice useful?