Put the material a selected pattern. To do the translation in various ways – for example, if you already came up with a figure themselves, apply it on the fabric with a special marker, which is subsequently removed from the fabric when washed. Before drawing on the material, sketch out a thumbnail drawing on paper, not to be mistaken.
Also to transfer the picture onto the fabric using transparent tracing paper. Put the tracing paper on the image and copy it, then place the tracing paper on a soft surface and pierce the outline with a needle around the perimeter.
Tracing paper with holes move to the fabric and paint over the contour drawing of tailor's chalk. Through the holes from the needles chalk powder gets on the fabric, and you will have a new contour.
Rhinestones can be glued in various ways, and extremely common are hot glue rhinestones. Their base is coated with a special adhesive that begins to melt when heat impact, therefore for gluing of rhinestones you'll need iron.
Under the fabric, place the paper or foil, and a temperature controller iron set on gentle (wool or silk). If you are confident in the high quality of purchased rhinestones, can use to bond the hot steam.
Rhinestones place on the circuit pattern in the desired order, cover with special material for Ironing delicate fabrics and lightly pressing them with the iron, hold it for two or three seconds in each place. The duration of keeping the iron depends on the size of the crystals – the larger the crystals, the longer you need to warm up the glue.
Do not press the iron too hard, otherwise, glue will appear on the edges of the crystals, and the crystals themselves can crack if they are poorly made. When all the crystals are glued, cool product.
When washing the product in the future, always Unscrew the thing inside out and wash it at temperatures above 60 degrees. If your termostatu covered with nacre, the temperature should not exceed 40 degrees. In order for the rhinestones stayed longer to wash the item is best hand.