You will need
- Thin hookah brush
- Fishing line
- Baking soda
First you need to disassemble the hookah. Remove the foil with the hookah bowl and remove the remaining tobacco, then you must pour out all the liquid from the jug. You can then proceed to the next step.
Reassemble the hookah, bypassing the process of joining pipe. Replace the nozzle (elongated hole is attached to the tube) to the water faucet so that the water poured in a thin stream. When the hookah is filled, remove the bowl of tobacco and substitute mine to the faucet so that the water poured through the hole. Rinse the hookah is preferably not less than 10 minutes.
After rinsing, disassemble the hookah and lay out elements on a clean towel to dry. The towel must be fresh to the hookah is not absorbed odors.
Now it is necessary to do cleaning of the tube. Contrary to popular belief it is not necessary to pass through it a stream of water, the pipe deteriorates, both outside and inside. To clean the short tubing is best to use a thin hookah brush. If you don't have a brush or the tube is too long, you can be armed with conventional fishing line tied to the middle of a soft cloth. Fishing line should be longer than the tube in half so you managed to push one end into the phone and clutching at him to drag tied a rag over the entire length. If after the first time the fabric is heavily contaminated, repeat the process, tying a new cloth.
Dissolve baking soda in water to the consistency of porridge. This mixture need to clean the bowl of tobacco. After cleaning, rinse the bowl in running water.
When all the parts of the hookah is washed, it is necessary to dry them. It does not use any mechanical means type of fan or hair dryer. For complete drying of hookah you will need 15 to 20 hours.
Do not use when cleaning the hookah no detergent (in addition to baking soda), as they contain large amounts of fragrance and dye.