You will need
- - a set of patches;
- - scissors;
- - alcohol;
- - rubberized material;
Inspect the inflatable bed and listen to her: if hole is large then, firstly, it is visible well, and, secondly, the air down would be noisy, so you can quickly identify the location in which you punched the mattress.
If inflatable bed broke while on holiday, then immerse it in the nearest body of water (sea, river, lake or pool): a thin stream of air will show those on a leaky inflatable bed places that need patching. Pull out air mattress from the water and mark the place of breakdown, not to lose sight of him.
Immerse in the home pull-down inflatable bed in the water not even try: raspisatsya water all over the bathroom and a hole and not find. Whisk liquid soap or detergent into fine foam and spread the foam alleged damage. Under pressure the air exiting the inflatable bed through the holes, the bubbles in the foam will increase. This is the place of damage to the airbed. Dry the mattress.
Remove from the set attached to an inflatable bed unit and, if necessary, cut a patch of the desired shape and size. Seal all the detected holes. Allow time for the glue to dry.
Retest (soaking in water or smeared fine foam) to make sure that the holes are no more. If suddenly will found a new place damage, and the patches are gone, use any rubberized material (for example, it may be the camera from the bike) and a special glue for bonding rubber to other surfaces. Degrease the surface with alcohol, apply glue and glue the patch.
If, after attempts to find a damage place on an inflatable bed did not succeed, do not rush to throw out the mattress. Take it to a shop of a specialist who provides repair services for inflatable beds.
To hear the noise of a punctured air mattress, you can use the miracle device (headphone, amplifier and microphone). Put on the headphones connected to the amplifier connected with microphone. Gliding slowly along inflatable bed slide microphone: the sound of descending air was heard very well and, therefore, to identify the holes will be easier.