You will need
- - sandpaper P400, R600, R1000 and Р2000;
- - water dispenser;
- dry soft cloth;
- - abrasive Polish for paint # 2 and # 3;
- - polishing machine.
Dry coloured detail at a temperature of 40 degrees for 2 hours, then allow paint to cool and rest for the day. For best results in Amateur conditions use acrylic paints. They do not require application of a protective layer of varnish and looks great after drying.
Make sure the paint is well dried and hardened. Only solid colours can be processed.
Using P400 sandpaper to scrape bruise. Take your time during this operation be careful not to RUB sand paper the surrounding paint. From time to time monitor the remaining height of the streaks, and rinse the powder of the dye formed in the process of polishing streaks.
Stachiw body streaks completely, gently using the water sprayer rinse off the powder residue from the paint, then wipe with a dry cloth. Inspect the treated area. It should not even be barely noticeable steps. More accurately this time, you can check by swiping your fingers across the treated place. If you do not feel any obvious irregularities, proceed to the next stage.
With dampened sandpaper R600 handle the place where there was a bruise, and the small space around him. The goal is to take risks, the rest of the work larger sandpaper. It is necessary to RUB by moving first in one direction and then in another, at an angle of 75-90 degrees, not to make more deep scratches. Level the surface, remove the ground off the paint, take a sand paper R1000 and try the operation again, slightly expanding the cultivated area.
Wash all the item and treat it completely with sandpaper Р2000 according to the technology described in claim 5.
Apply polishing sponge Polish # 2 and using a polishing machine Polish the item to a glossy Shine. If you look closely, on the polished parts were minor scratches. Remove them with a Polish number 3.