Advice 1: How to pull the cartridge out of the printer

When the cartridge to an ink jet printer in the inkjet ink, there is a need or replacing the cartridge or refilling it with ink. In the first, as in the second case, the cartridge necessarily need to be removed from the printer. If you do everything right and don't rush to get it out of the printer will not be difficult. The main thing - do not overdo it and not to make unnecessary physical force. Otherwise, you may damage the print head.
Instruction
1
Although printer models are many, but arranged them all about the same. If this method for your model does not fit, you will be able to see for yourself. Also the following methods can only be used printer's. Not forget about the manual - if you bought a new printer, you had to give all instructions must include information on removing the print cartridges. If you have a multifunction device, it's likely that none of the methods will not work.
2
Power on the printer. Wait for a while until it completely will not start. Then open the cover of the printer. After opening the carriage with the printhead where you inserted the cartridges will begin to move. Wait until it fully stops. You can then remove the cartridge.
3
In many models of printers just pull the cartridge itself. In this way, the cartridge is removed from the clamp, then it should just pull out (typical for Canon printers). If the cartridge can not be, better not to hurry and not to exert unnecessary effort. Let's see, there are a lock lever. If there is, then just move him to another position, after which the cartridge can be removed.
4
Also in some printer models in order to remove the cartridges from the clamp, you just need gently to put pressure on them (as is typical for many models of Epson). Then you hear a click. Now the cartridges can be pulled out.
5
Owners of Canon printers IP series first, for example, it is easier to remove the print head and then remove the print cartridge. To do this, after stopping the carriage with the print head drag lock lever in the down position, then remove the printhead cartridge. To do this, take it from the top and gently pull down.

Advice 2: How to pull out the cartridge

Today, no office in the world is not complete without the printer. Indeed, the capabilities of this machine does not just make life easier for employees, but also make the process of withdrawal and transfer of data easy and fast. Unfortunately, there are times when you have to intervene in the operation of the printer, for example, to pull out the cartridge with any problems or refills.
Instruction
1
When complex problems must be done by the specialist, but for small problems it will be able to everyone. The cartridge should pull out, if it jammed, not stamped text on paper or begin to spoil. Removal of the cartridge can eliminate these problems.
2
Locate the printer-specific pull-tab or notch, which opens it to the cover. Open it and click on the notch lever (if available in your printer model). Attention: laser printer fuser gets very hot – don't touch him, so as not to burn the skin on the hands.
3
Cartridge need to take the handle and pull from the slot on yourself, putting little effort. If the cartridge cannot be ejected, do not rush to remove him by force that it could seriously break down. It is better to call a master service from the service center. To prevent damage to the print cartridge, handle with care. Your respect for the cartridge is the key to high print quality in the printer.
4
Also remember that to remove the cartridge from the printer, and ink jet type need only 2-3 minutes, as in the cartridge can dry up on ink. In this case, you will have to refill the cartridge with new ink, because the old has become unfit for further use. When you put in order to protect the drum cartridge cover, do not lift it. The curtain closes colorant in the cartridge from drying and exposure to sunlight.
5
Eliminate mechanical impact on cartridge and not leave it under sunlight, which spoils the print quality is. Try to conduct all transactions with the cartridge carefully and quickly: as soon as I removed the jammed paper, or lined protective shutter on the toner cartridge, put it back in place and close the cover. When you pulled the cartridge out of the printer, it can not shake or knock on his hull. Otherwise you risk to pour the remnants of toner from the cartridge and to dirty himself and his clothes.
Is the advice useful?
If you have rings or bracelets, take them off so as not to get injured.
Search
Is the advice useful?