Advice 1: How to print labels

The label contains information about any thing, whether the goods in the store, a DVD drive in your files, clothes at the dry cleaner or other object that needs labeling. Depending on the destination label may contain information of different types and at different extent. The form of execution it can be a sticker, card, tag etc. depending on the source of these diverse factors, and you should choose the method of printing labels.
Instruction
1
If you require the production of labels having any special properties (e.g., warranty of non-removable labels or non-adhesive heat-resistant, etc.), then, of course, should apply to any company having the appropriate equipment. The same option should be chosen when you need to print large number of labels. To find such enterprise you can in the Internet, and through local information service products and services.
2
If special requirements to materials, and volumes no print, use of a personal computer in combination with a printing device. Start with the preparation for printing of the label model. You can use any graphic or text editor. If you plan to create your own label, the main party of which is graphic design, you can use such as Adobe Photoshop. If the primary must have a data load with some graphics, it might be more word processor Microsoft Office Word. Below we consider the second option.
3
Load the word processor, press the alt key then the down arrow key and press enter to open the dialog for creating a new document with three frames. In the left frame, browse to and click the "row Labels", resulting in the middle frame will appear the list of template types - labels on folders and envelopes, gift, commodity, CD/DVDs, tags, etc. Click on the section name and in the same frame will be loaded the appropriate template labels. Choose the most suitable option, and click the "Download"button.
4
Complete data of the selected template. If necessary, edit using MS Word its appearance and format.
5
Prepare the printing device. When printing on sheets of standard sizes, you can do the usual printer, if you are going to print on polymer media, then you may need a thermal printer with roll feed paper. Make sure the printer is plugged in, connected to the computer and equipped with adequate quantity of consumables, and then press ctrl + p in a word processor and send the print-prepared layouts of labels.

Advice 2: How to print stickers

The inscriptions on the jars of spices and pickles, or the backs of folders, tagging on the boxes with materials for needlework - for all do not have to use paper and glue. Much more convenient to use labelsmade with a printer and self-adhesive paper. In addition, in the same way, you can make and gift stickers to please the child with images of heroes of his favorite cartoons.
You will need
  • laser or inkjet printer
  • - self adhesive A4 paper
  • - image to create stickers
  • - graphic editor
Instruction
1
Go to any well-known graphics editor, for example, CorelDrow.
Determine the approximate size of the required labels and how many labels you want to place on a single sheet of the desired format, for example A4. In order to make it easier to deal with this, take a clean sheet and draw on it a rectangle of that size in which you would like to see the sticker. Or measure the subject matter, which is intended to label, for example, a jar for spices. Let's say you need sticker of size 5 by 5 cm
2
How to find out how many stickers can fit on a sheet? Paper size is A4 - 21 by 29.7 cm Subtract from the height and width of the sheet one by one centimeter - they do not take into account, since most printers when printing leaves a field of about 5 mm from each edge. You will have 20 to 28.7 inches. Divide the remaining width of the sheet to the width of the sticker is 20/5 = 4. This means, the width of the sheet you can put five stickers. Do the same with the height of the sheet and the height of the sticker. In this example, the height you can put in a sheet of five stickers, will be 3.7 cm extra.
3
Create a rectangle the size of your future label. Set the rectangle to a thin stroke that is different from the main background of the sticker. Develop a layout of the first label - select a background, apply the lettering, add a picture if needed.
4
If stickers will be of the same type, create layouts other labels on the basis of the layout first. Copy it and edit it to make any necessary changes. Or, if all labels must be the same, just copy the layout as many times as necessary. Place your stickers next to each other - so they will be easier to cut.
5
Once the sheet is filled, take it to print. Put in your printer sheet of self-adhesive paper. When you do this, be careful not to confuse the front side of the sheet, which has performed printing and protective layer that peels away before applying the sticker to the surface. If you have an inkjet printer, then put in a sheet of the desired party is not difficult. But in some laser printers you need to put the leaves face down, as they turn over the paper. If you print on plain paper, on it is possible not to think. But in the case of “adhesive” error will lead to the deterioration of the sheet.
6
Sending the sheet to print, select the printer dialog right kind of paper, that is “Stickers”. Correctly specify the format (in the case of the present example is A4 and orientation is portrait or landscape.
7
Cut printed stickers using scissors or a cutter office.
Note
The color of the sticker on your monitor and print may differ from each other.
Is the advice useful?
Do not place labels close to the edge of the sheet - as mentioned above, it leaves the printer when printing the edges of the field about 5 mm. part of the sticker caught in these fields will not be printed.
Search
Is the advice useful?