Take two large square shawl. Their size must be identical and be at least a meter diagonally. Using a measuring tape and measure the distance from your waist to a point below the clavicles on 2-3 see the same cut measure from the back.
Lay both of the handkerchief on the table so that their corners coincide with the vertical and horizontal axes (i.e., it will not be square, and rhombus). On the shawl, which will be the front of the blouse, start from the lower angle of 10 cm and place tailor's chalk dot. From this point on the vertical axis put up the removed measurements (front length to the waist line). Through this point draw a horizontal line parallel to the horizontal axis, from edge to edge of handkerchief. The same line will draw through the bottom point on the waist line.
Define the width of the blouse. For this measure poluobhvat chest and add the required number of inches if you want the clothes came out free. Mark this distance on the two horizontal segments and slide them perpendicular to the vertical line. On them lay the line on the sewing machine. Thus the lateral corners of the shawl must remain on the outside of the blouse. At the level of the waist line on the sides vsheyte one loop order then it is possible to insert the belt.
Pick up the two silk ribbons, suitable color to the scarf. m. They will replace the straps. Pristrochite two straps at the upper horizontal line to the back of the blouse. The front on the same level sew a button, button, hook or Velcro. The second part of the selected accessories clip on the end of both straps.
Remove the product on the front side and try on the blouse. The upper corners of the handkerchief will fall in front and behind, creating an unusual drape. At waist level it is necessary to intercept the blouse with a thin belt, threading it in the prepared loop.
The colors of the scarves for the front and back of the blouse may be the same or different (in this case, ensure that the colors and patterns of scarves in harmony).