Advice 1: How to make a chandelier with his own hands?

Original lamp for interior decoration can be made from accessible and simple materials. This item is made by hand, can become accent in the decor of the room, if you show creativity and accuracy.

Chandelier from threads with their hands



For making this lamp you will need a thick colored thread. Before you start to make a lampshade, check out the threads on the stability of the dye. Take a small piece from each roll, soak them with PVA glue and RUB the friend about the friend, then lay on a white sheet. If some paint smeared, better not use these threads for DIY. And that shade will turn out with dirty stains.

Inflate most conventional balloon to the size of what you want to see the finished chandelier. Make several turns of thread the same color all over the rubber surface and RUB it with a brush with PVA glue. Then take the yarn of another color and do it the same operation. Thus the layers wrap a ball of multicolored thread. You can repeat these layers or do anything different.
Wrap the balloon can be of the same color yarn, thin yarn, jute or hemp rope.


You need completely dry cotton lampshade. Hang it so that it was in the air and touches nothing. This can be done by putting a flat plank between the backs of two chairs, and on it the thread tying crafts. Or lay the ladder and attach the lampshade in the center, so it does not touch the stairs. On the floor lay a rag or newspaper, glue, thread will drip.

Leave a makeshift lamp to dry for a few days. Then pierce with a needle ball and remove it. The shade can be left in the form of a ball or cut it into two semicircles. In this case, the finished appearance can be given by treating the cut edge with a thin lace. For the lamp use energy-saving light bulb.

Chandelier with pendants



To make a chandelier with pendants can be modifying ready. You need from her metal frame. If the foundations you have not, use a wooden or plastic Hoop large size or a twist wire frame.

Choose a material for the manufacture of suspensions. You can put a glass or wooden beads on thin twine making thread. For an additional decoration on these threads attach the feathers, they will add a romantic chandelier. If it is the lamp in the nursery, the quality of the parts for the suspension, take small toys. You can use both soft and lightweight plastic.
Unusual and will look to the lamp, if you make charms, or to wrap the frame metal chain with small links that are sold at the cut at the hardware store. In the future, the chandelier can be painted from a container.


Depending on made pendants decorate the frame. It can be painted or tighten tissue. Secure on the basis of decoration and the chandelier is ready.

Advice 2: How to make a lamp with your hands

For the manufacture of the original lampand their hands fit the most common items: plastic bottles and disposable tableware, thread and twine, felt and crocheted doilies, even a teapot and used coffee filters.
You will need
  • For the light-cones:
  • plastic bottle 5 l;
  • - disposable spoon;
  • - super-glue;
  • - the knife.
  • For the lamp from the paper:
  • paper lamp ball;
  • - tissue paper;
  • - scissors;
  • - double sided tape.
  • For coffee lamp:
  • - shade light shade;
  • - PVA glue;
  • - used coffee filters.
  • For lamp-maker:
  • - kettle
  • - the drill.
Instruction
1
Lamp-bump of plastic spoons
Cut the bottom of a plastic bottle, Unscrew the cap. This will be the base for the light. Cut the handles of plastic spoons. Apply on top of your spoon a drop of super glue and glue to the bottom of the bottle. Detail press and hold for a few seconds. Next spoon stick as close as possible to the first. Glue the remaining parts in the series. Tablespoons of next row, attach offset and overlap on the previous number. Try to make a plastic bottle was not visible. Similarly glue all the spoons on the base. Insert the lamp cartridge and replace the energy saving light bulb. It is not heated, so this shade melts.
Lamp-bump of plastic spoons
2
Lamp made of paper
As the basis for this original chandeliers you will need a simple paper lamp sold in IKEA. Of tissue paper cut into circles of the same diameter. Glue them to the paper lamp. Attach parts of tissue paper a piece of double-sided tape and glue to the lamp, wherein the first number of do at the bottom, and affix the subsequent lap.
How to make a lamp with your hands
3
Coffee lamp
This exquisite lamp - a real godsend for coffee lovers. Invented his American designer Lampada, but it is possible to do with their hands. For its production will need coffee filters, which should be pre-washed and dried. Prepared filters stick on a lampshade with PVA glue and allow the lamp to dry. Now you can insert a cartridge, screw in energy saving light bulbs and enjoy the pleasant soft light and light fragrance drink.
How to make a lamp with your hands
4
Lamp-kettle
The original idea for a lamp made with your own hands, you can borrow from Italian designer Tommaso Guerra, who created a cute lamp of an ordinary kettle. Take the teapot (the easiest way to work with plastic), and make the bottom hole of the required size, to be able to insert the cartridge. To do this, use a drill with a special nozzle. If necessary, during operation, rinse it with water. Insert the cartridge and screw energy saving light bulb.
How to make a lamp with your hands
Search
Is the advice useful?