Advice 1: How to seal an apartment

To seal the apartment is necessary to preserve the property intact, to prevent damage or theft. Sealing occurs in cases of waiting the heirs of the making of a protected inheritance, in the case of recovery from the debtor.
Instruction
1
The right to take the necessary measures to preserve the property and sealing of the apartments have public notaries (private notaries do not have such a right). If you are a notary, at the request of the heirs go to the location of the inheritance. Also take measures for the protection of the property, if found out that it was left unattended after the death of a citizen.
2
First describe everything in the apartment property (furniture, clothes, jewelry). A report listing the quantity, size, color, and year of things, sign it in the presence of witnesses. Left the apartment, attach a strip of paper on the door, putting the date of the inventory, position and stamp.
3
If the inventory is constantly interrupted or occurs for several days, it apachetivity apartment every time you exit from it. Be sure to specify in the act the reasons and time of the termination inventory, restore it. Also write in the act on the state seal or print in the autopsy room.
4
Remove the seal from the door when the process of the establishment and announcement of heirs. If such is not found, you have the right to make the act of transfer of property to the state.
5
In other cases, the sealing of the apartment occurs only by court order. If you are the bailiff, please refer to the senior officer for permission to enter the apartment of the debtor. After the forced eviction of tenants, the flat seal indicating the time, position and name, put the state seal.
6
Don't forget to present the writ to the debtor or to the violator indicating the amount of performance fee.
7
If you are a debtor, remember that the bailiff legally has the right to enter the apartment if he has a writ of execution, to examine and describe the property, if necessary to seal the apartment.

Advice 2: How to seal a safe Deposit box

Safes are widely used in the daily activities of the various agencies. To ensure the safety of the contents and to establish, was not revealed whether the safe without the knowledge of the person responsible for storage of documents, used various types of seals. To seal the safes in several ways. The main requirement to the technology of sealing of the storage – reliability.
You will need
  • - a sheet of paper;
  • - seal of the organization;
  • glue;
  • - suspended die;
  • - strong thread;
  • - clay;
  • - metal seal;
  • - sealing device.
Instruction
1
For securing the safe that are not equipped with special devices, use of printing paper. Cut from a sheet of paper strip across the width of normal printing organizations (or slightly wider). Put on the sheet two or three impression of the seal used, for example, to send correspondence.
2
On the strip, also specify the current date and signature of the person responsible for keeping the contents safe. Now glue the strip to the box so that it overlaps the gap between the door and the base (best if the paper seal closed the keyhole of the safe).
3
Use also for sealing the box outboard the die. It can be made from wooden boards or a suitable plastic parts. On the inner side of the safe output two strands, one of which is mounted on the door, and the second, on the surface of the safe. Close the safe. Place into the recess of the die a piece of clay and push in the ends of the threads. On top of the clay put the imprint of the metal print used for sealing boxes.
4
If no dice, use two pieces of clay and strong thread. Attach one piece of clay on the door and the second bar adjacent to the door. Close the safe. Attach pieces of clay to the thread and drown it in material, to form two small "cakes", and the thread passed inside them. Now apply a metal seal to both pieces of clay to remain clearly visible prints.
5
If it is technically possible, equip a safe sealing device with a folding or retractable stock. For securing the safe also using the clay and metal printing. Close the safe, put on the door rod (or move it). Clay seal recess in the device. Attach to the clay stamp by making a clear and easy-to-read print.
Search
Is the advice useful?