Advice 1: How to set the radio

In our time it is difficult to find a car that is not equipped with at least the simplest sound system. However, install the radio and speakers - even half the battle. We still have to configure the sound so that listening to it was nice.
Instruction
1
If your radio has the ability to set individual frequencies for each speaker - use this and redirect low frequencies to the speakers larger, the best way to do this, adapted (usually located in the rear). If you have a subwoofer, then it usually is a separate section of the settings.
2
Using the tools of the Fade and Balance set of sound you're most comfortable with. Music, as a rule, has a stereo, so four (or more) speakers to play it is not required. However, if your speakers reproduce different frequencies, it makes sense to experiment with a selection of some of them out of the picture.
3
Adjust the loudness so that low frequencies are not lost at low playback volume, but not buzzed at high.
4
If necessary, adjust the frequency pattern of your sound. These settings are very individual and depend on the perception of the listener, the speaker type and genre you are listening to music.
5
Listening to music, podpravlyaya settings until, until you are satisfied.

Advice 2: How to set up a radio receiver

On the radio there is a power button bands AM/FM1/FM2. It allows you to turn on the radio and to switch between FM/AM. In this case, the display will show the selected indicator range of your radio. There are also buttons to manually adjust radio stations, which is designed for tuning the radio manually.
Instruction
1
If you want to increase or decrease the frequency for this there are also special buttons that are close and look generally like a triangular parenthesis are directed respectively up and down (possible different variations, depending on the radio).

Often has an option to automatically search for radio stations. To enable the automatic search for a radio tap and hold on it before filing a characteristic of the audio signal. Upon detection of a stable signal for high-quality playback auto search will stop on their own. If you will be forced to suspend the search, press this button 1 time.
2
In radio there are buttons that enable you to program and switch the radio station. Most frequently listen to radio stations you can store radio. To find and switch them, you need to click on the device settings one of the buttons that are numbered.

Catch the desired radio station using the buttons that increment or decrement the frequency. Next, press and hold the preset button until a beep sounds.
3
In order to stop the playback of radio stations, click on the button labeled Power (usually it is round size).

Listening to music, adjust the RF signal until, until you are happy with the quality.
Note
- Each mode of search of stations may allow to set for 6 AM, FM1 and PM2 radio stations separately from each other.
- In the descending order of the reception quality of the signal is automatically programming of the six stations.
- If in the automatic search radio stations are not programmed, no radio, the display will light up the indicator “A”.
Is the advice useful?
When disconnecting the head unit, replacing fuses, or replacing the rechargeable battery, radio FM tuning is erased. Don't forget that.
Search
Is the advice useful?