When properly installed a high quality alarm system with dual dynamic code to open the car without triggering impossible. Therefore, the hoodlums resorted to breaking into a car, counting on the inattention of the owner and the indifference of the witnesses. But most models of alarms have errors and assumptions. Knowledge of the installation method and model alarm helps to disable it using the weaknesses of the design. To learn is stickers manufacturers or services, as well as standard modes of operation of the led.
If information is not sufficient and the alarm can not be disable, are used multiple attempts to find a weak spot. Perseverance in this matter is determined by the desired vehicle or not.
Often used a way of persuading the owner that the system got corrupted. The alarm can be visible to the owner of the reasons. The actions of the hijacker is aimed at the conviction of the owner of the need to deactivate the alarm. This is done by throwing the rubber ball in the back or shooting from air gun on the wheels.
Therefore, when alarm is triggered, look closely: it is not located near any strange personality. In any case, do not disable the alarm and soon check for serviceability. Put the car on a guarded Parking lot. Remember that the hijackers constantly watching you, and demonstrate your strong desire to protect the machine may cause the hijacker to abandon his plans.
Do not rely excessively on the possibility of signaling. It only helps protect the car against theft regardless of its value. Always pay attention to all of her positives.
Consider methods of protection weaknesses of an alarm. To disable hijackers are often cut off power to the system, knowing that it comes from the battery and goes in the car. Get to the car bottom, they cut the wire coming into the cabin from the generator, and disconnect the alarm. A car alarm not provided with Autonomous power supply ceases to function.
In addition, the hijackers often incapacitate the common circuit fuse system, arranging the short circuit in the indicator during the alarm. Jammed the siren, damaging it, or spraying a fast-curing foam, if it is poorly hidden. Discharged a Taser into the body of the machine or on the wire indicator than incapacitate or removed from the security alarm.
On many car models features installation of alarm system assume the availability of wiring system from outside the vehicle. The thieves just cut the right wire to disable the system. Code the FOB to control the alarm, select (scan) the computer if the alarm is not equipped with anticamera.
Also intercept code code-grabber, record and subsequently reproduce it to remove the protection mode, if the alarm does not have dynamic code. Dynamic code decrypt and knowing the algorithm of its construction, to predict the next code. Against this helps the double dynamic code.
Advice 2: How to disable the alarm
To ensure the safety of property, people resort to the use of such remedies as alarm. If we talk about cars, there are quite a number of devices that are placed and removed from protection with a special keychain. How to disable the alarm in abnormal case?
If you are unable to remove the car from protection with keychain, check whether it is working condition (very often the cause of the fault becomes of the discharged battery). Replace your old and then try to repeat their actions.
The signal that is coming from the remote control directly to the car can be "smothered" by extraneous signals, in this case, get as close as possible to the car and again try to disable the alarm.
If the previous two steps did not yield positive results, then determine the type (by name) installed on your car alarm. Depending on this, will be selected in subsequent steps.
Open the car door using the key (in this moment should trigger an alarm and to turn on the Parking lights).
Turn on the car ignition.
Look in the cabin and push-button Valet switch car alarm (usually in the standard version, this button is located near the driver's footwell, directly under the steering wheel, the back side of the steering column near the Parking brake or under the driver seat).
After ten seconds press the off button alarm Valet, it will give the option to disable the alarm and start the car.
Use a personal code, if any. Open the car using the key. Enable, disable and re-enable the ignition. Press the Valet button the number of times corresponding to the first digit of Your code. Then shut down, and then again turn on the ignition and press the Valet button the number of times corresponding to the second digit of the code.
Is the advice useful?
In any case keep calm and follow the sequence of the actions listed. If they don't help, you should not deal with Amateurs. Call service to deal with the problem will help qualified professionals.