Advice 1: How to sew a t-shirt

Sew myself a fancy t-shirt of knitted fabric quite easily and quickly. Sewing a t-shirt need color of cotton Jersey with elastane fibers. The easiest style - straight fit with slightly lowered armhole.
You will need
  • Cotton Jersey, centimeter, thread, serger, sewing machine.
Instruction
1
First you need to take the measurements: length of shirt, bust, hips, waist. To draw on paper patterns. Patterns of the back and front are virtually identical. You need to draw a rectangle where the length of a rectangle is the length of shirt, width of the breast volume. Free fit allow 3-4 cm
2
The rectangle to draw the appropriate markup in place of the waist to draw inside a smooth concave line, as if "pritalen rectangle. If the hip measurement is much larger than the volume of the chest, gradually to extend the pattern down a few inches. To impose patterns on one another and apply a neckline. For simplicity and precision the neck back and front to cut your old t-shirt. All patterns are ready.
3
Before cutting out the fabric needs to be folded in half, face inward. Pattern to put on fabric strictly according to the knit columns, using them as an equity line. The seams add 1.5 inch for the bottom hem 4 inches. Carefully pin the pattern to the fabric with sewing pins. Carve out carefully with sharp scissors, being careful not to move the pattern with knitted fabrics.
4
After you cut out the parts to sew on the overlock machine. First, sew the shoulder seams. Then sew side seams, leaving 20-25 cm unsewn for armholes. Then in the sewing machine to insert the double needle. To turn on the wrong side of the seam of the neckline and armholes about one centimeter, tack. The bottom of the t-shirt remove 3 cm, tack.

Carefully priotity bends. Then double needle to pristroit swept up on the wrong side of bends. Ironed product.

Advice 2: How to sew a shirt

To sew a shirt for an hour, max. Just need to make a pattern, sheathing bake the neckline and two side seam. Now you can decorate with beads, sequins, rhinestones, patterns, fabric appliques, and a lot more than.
You will need
  • knitted fabric (150 cm width, 70 cm long)
  • 70 cm piping (with a width of 4 cm)
  • thread
  • needles
  • sartorial meter
  • sewing machine
  • paper patterns
  • chalk
  • scissors
Instruction
1
On paper make pattern. Tops knitwear have almost the same structure of the shelves and back. Why does one part of the pattern: this is the quarter of the future Mikey. The width of the lower edge of this part - 24, 5 cm Height at the center and 35 cm on the outside (sides) - 36 cm Width of shoulder straps - 7 cm From the straps to the side fold lines and the side lines, draw two arcs: this is the cutout for the neck and armhole sleeve.
2
Lay the pattern on the left side of the fabric. Shelf and back should eventually consist of each of the two parts of the pattern without cutting. Circle pattern small. Add to this the contour of 1 cm around the perimeter. Cut cut the pieces of fabric with scissors.
3
Fold the bias tape in half. Keen on her neckline. Prostrochite seams on the machine. Sew the side seams of the product. The bottom of the shirt fold and sew too.
Is the advice useful?
The perfect knit for the shirt is 95% cotton viscose and 5% lycra.

To do the seams on the shirt have overlocked seam. Another option is to set the sewing machine to the zigzag stitch.
Search
Is the advice useful?