Advice 1: Why your headset isn't working

In today's world it is difficult to imagine anyone not having a headset. Music accompanies us everywhere: in the subway, in the bus, house, etc. Breakdown of headphone can be a lot of trouble as an avid music lover and the person to whom the headset is required to work.
There are often situations when the headphones from the computer suddenly stop working. The reason may be the lack of suitable audio drivers. This situation may occur after reinstalling the computer system, such as Windows 7 to Vista, etc. Determine their own or with the help of special programs the availability of the necessary drivers in your PC and if necessary install the missing.The failure of the headset can be explained by the rupture of the cable. It can happen in misuse with headphones when they abruptly pull the cord. While the difference may not be noticeable, therefore, immediately to establish the true cause of the disappearance of sound is impossible.Test the headset by connecting them to another device, probably just a loose socket on the panel of your computer. By the way, this is another reason why the headset may not work. So, if you are connecting to another device or, for example, the rear panel, the sound in the headset appeared in the nest. If not – you need to change the damaged cord.The telephone headset may not work because of damage to the headphone Jack. To resolve this problem is possible only in a specialized service center that is servicing the equipment brand of your phone.If the new headset microphone not working, maybe it's his low sensitivity. First check the microphone on another computer. In case of positive outcome of the test, i.e. confidence in its work on other equipment, you need to fix the mixer settings.There are times when the headset microphone does not transmit your voice on Skype. So you should check the settings of the Skype. Sometimes he can use another device as a microphone. Just choose in the sound settings microphone.In order to avoid unexpected breakdowns headset, do not let small children play with her. Often they mess up the wiring, pulled the cords and break the microphones. Themselves treat the headphones gently.

Advice 2: What to do when one earphone is not working

Unfortunately, sales are still no devices that send sounds encoded in the electrical signal directly to the brain. Therefore, this signal is sent to the playback device to the speakers of the headphones, which create vibrations in the air picked up by the membrane in the ear of the listener, and further converted into signals of nerve endings. If one of the headphones suddenly stops to shake the air in the ear of the listener, then the reasons can be several and some of them can be eliminated quite easily.
To cope with this is not fatal, but a nuisance you first need to determine what is out of order "to localize the fault, as expressed in the films of any "electrocute Pro". Start by checking the basics - make sure that the plug connecting the headphone wire is firmly seated in the Jack. The contacts that transmit signals left and right channels on the modern pin connectors made in the form of rings, located one above the other. If the plug is not inserted up to the stop, the upper ring does not relates to the corresponding contact in the connector and one of the head phones not getting signal.

Another reason could be improper functioning of the device connected to the earphone, a special program ("driver"), providing for its joint work with the systems of this device. Most often, the trouble of this kind happens when headphones are connected to computers. It can only eliminate installing a suitable driver is usually included purchased headphones or the device to which they are connected, there is a disc with the required software. If not, then you'll have to find the driver on the Internet.

Both the above causes are eliminated without "surgical intervention" as himself "patient" (headphones) does not have any damage. If you get to work and the second speaker device of the above methods failed, it is likely that such damage is still there. Inspect the patch cord from the headphone Jack - maybe it is partially damaged and the contact wiring of one of the channels is broken. Most often this occurs near the connecting plug from the speakers and headphones. Of course, the headphones with that kind of damage will have to change, but in the interim, you can replace the damaged part, if at your disposal is an unnecessary device with a similar connection cable. In this case, simply cut the damaged part, clean and twist the wiring of old and new connecting cords and tape (duct tape, adhesive sticker, etc.) the connection of at least one of the two wires.

If none of the above made headphones to function properly, it is very likely that a damaged speaker or something else inside the case broken head phone. As these headphone parts usually are molded, you just have to say goodbye to headphones and indulge in a new purchase.
Search
Is the advice useful?