You will need
  • level;
  • - wire;
  • - fittings;
  • - the cable.
To secure the mesh-netting, you need to mount the basis for the future fence. Usually the fence netting are doing on metal or wooden poles, which are securely embedded in the ground.
Prepare the poles for attachment mesh-netting in advance. If it is wood, it must be sanded, treated with a special waterproof mastic. Metal posts cleaned of rust, coated with paint or mastic for metal, as welded hooks for mounting the grid is the best option if you plan to do stretch the fence from mesh-netting.
If you are going to frame a fence, except the posts need a frame for mounting the grid. The frame is made from wood, welded metal parts or profiles. The height of a single frame from 1 to 2 meters in width, it is better not to do more than 3 meters. Once the frame is ready, to him by means of clamps or a thin, flexible wire, attached the wire-netting. Finished frame with stretched mesh clip on dug into the ground and concreted the posts better.
In case you have chosen the easiest form of a fence from mesh-netting – stretch, you have to first dig all the poles, starting from a corner, and then attach the grid directly to the post. It is either fixed in advance to the welded hooks or if the hooks on the posts there, gets attached to them with clamps or wire.
Pull the grid needs as much as possible so she does not SAG. First, bind the edge of the mesh to the post and only then pull it and attach to the next post. Raise the mesh above the ground a few inches, if you want to protect it from excess moisture -- if the stack is constantly in contact with moist soil, it will rot quickly.
The upper edge of the better to pass through the mesh of thick wire, wire rope, fittings – this will also prevent the mesh from sagging. It will be useful also if you miss the wire and through the lower edge.